Low cost one or two axes motion controller based on LM628 or/and LM629; 12 bit D/A converter; 32 bit position, velocity and acceleration register per axis; 3 inputs and 1 output galvanically isolated per axis; No transition module required; Operating temperature 0°C to +70°C

MC68302 Multiprotocol Communication Processor running at 25MHz; 1 Mbytes of Dual-Port SRAM, organized as 512K x 16 for program and data; Physical interface: 3 serial channels and 4 general purpose I/O lines on IP I/O connector; Internal microcode within the MC68302 supports a variety of protocols, such as BISYNC, HDLC, SDLC, UART, DDCMP, V.110, ISDN (2B+D) and transparent modes; Operating Temperature 0°C to +70°C

MC68360 Quad Integrated Communication Processor; 256 kbytes of Dual-Port SRAM organized as 128K x 16, 256 kbytes of Dual-Port DRAM organized as 128 k x 16; Physical interface: 4 serial channels ; Internal microcode in the MC68360 supports a variety of protocols, such as BISYNC, HDLC, SDLC, UART, DDCMP, Apple Talk, Signaling System #7, Profibus, ATM, X.14, X.21, ISDN, and totally transparent modes; Operating Temperature -40°C to +85°C

SERCOS bus interface using the SERCON816 controller chip (SERCON410B Compatible Mode only); On board RS485 interface; Transition module for fiber-optic available (TIP812-TM-10x); Operating temperature -40°C to +85°C

LON bus interface based on Neuron Chip 3150; 4Kbytes Dual Port RAM; 32Kbytes EPROM for protocol firmware and application; RS485; Includes MIP/DPR license; Operating temperature 0°C to +70°C

CAN bus controller supports standard and extended frames according to CAN specification 2.0 part A and B; Physical interface optically isolated; Philips fault tolerant CAN transceiver TJA1053; Operating temperature -40°C to +85°C