DIN Rail Mounting I/O module, 95 mm x 83 mm: 8 DB9 male connectors; Terminal point for shield of all DB9 connectors; Supports front panel I/O versions of the TPMC866; Cable TA105 (0.8m ribbon cable with 50 pin ribbon cable connector and 50 pin SCSI-2 male connector) is included

6U / 8TE EMV front panel; 8 DB25 female connectors mounted in front panel; Supports front panel I/O versions of the TPMC866; DTE and DCE configuration by jumper fields; RS422 and RS485 termination selectable by jumper; +5V / GND by 2 pin terminal block; Power only required to supply on board termination or to provide +5V to pin 9 of the DB25 connectors of channel 1 to 8; Fuse protected by a 1A multi-fuse; Cable TA105-10, (0.8m ribbon cable with 50 pin ribbon cable connector and 50 pin SCSI-2 male connector) is included

6U / 4TE EMV front panel; 8 shielded RJ45 mounted in front panel; Supports front panel I/O versions of the TPMC866; DTE and DCE configuration by jumper fields; RS422 and RS485 termination selectable by jumper; +5V / GND by 2 pin terminal block; Power only required to supply on board termination or to provide +5V to pin 1 of RJ45 connectors of channel 3 to 8; Fuse protected by a 1A multi-fuse; Cable TA105 (0.8m ribbon cable with 50 pin ribbon cable connector and 50 pin SCSI-2 male connector) is included

6U / 4TE EMV front panel; Sixteen 4pin RJH connectors mounted in front panel; Supports front panel I/O versions of the TPMC866-10/12; RS485 termination selectable by jumper; +5V / GND by 2 pin terminal block; Power only required to supply on board termination; Fuse protected by a 1A multi-fuse; Two TA105 0.8m ribbon cables with 50 pin ribbon cable connector and 50 pin SCSI-2 male connector, are included