Products  
  TPMC470-10R 4 Channel Isolated Programmable RS232/RS422/RS485, HD50
4 channels of high performance programmable RS232/RS422/RS485 asynchronous serial interface; Galvanic Isolation of each Transceiver Channel; Programmable termination and full/half duplex mode; Programmable baud rates up to 921.6 Kbaud for RS232 and up to 5.5296 Mbaud for RS422/485; Support of RxD, TxD, RTS, CTS, GND per RS232 channel, RxD+/-, TxD+/-, GND per RS422/RS485 FD channel and Dx+/-, GND per RS485 HD channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

  TPMC470-DOC User Manual for TPMC470


  TDRV002-SW-25 Integrity Software Support
Device driver; Source code; Programmer documentation

  TDRV002-SW-42 VxWorks Software Support
Legacy and VxBus-enabled Software Support; VxWorks Device driver; Source code; Programmer documentation

  TDRV002-SW-65 Windows Software Support
Device driver; Programmer documentation

  TDRV002-SW-82 Linux Software Support
Device driver; Source code; Programmer documentation

  TDRV002-SW-95 QNX Software Support
Device driver; Source code; Programmer documentation

For other operating systems please contact TEWS.
Accessories  
  TA101 HD50 Cable
1.8 m cable with two 50 pin male SCSI-2 type connectors.
The permissible maximum voltage for the TA101 is 30V DC.

  TA201 HD50 Terminal Block
50 pin terminal block with 50 pin female SCSI-2 type connector.
The permissible maximum voltage for the TA201 is 30V DC.

  TA301 Cable Kit for Modules with HD50 Connector
1.8 m cable with two 50 pin male SCSI-2 type connectors; 50 pin terminal block with 50 pin female SCSI-2 type connector.
The permissible maximum voltage for the TA301 is 30V DC.