+49 4101 4058 0 info@tews.com

Showing 13–24 of 25 results

  • TXMC895 I 4 Channel Gigabit Ethernet XMC Module

    TXMC895

    4 Channel 1000BASE-T Ethernet
    • Short single-width XMC module
    • 4 channel 1000BASE-T / 100BASE-TX / 10BASE-T
    • IPMI resource: FRU hardware definition information stored in on-board EEPROM
    • PXE and iSCSI boot (16 Mbit serial flash)
    • IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping
    • Front I/O via 4 RJ45 connectors
    VIEW FULL SPECIFICATIONS

  • TXMC897

    2 Channel 10GBASE-T and 2 Channel SFP+ 10 Gigabit Ethernet
    • Short single-width XMC module
    • 2 channel 10GBASE-T / NBASE-T / 1000BASE-T / 100BASE-TX and 2 channel SFP+ 10 Gigabit
    • IPMI resource: FRU hardware definition information stored in on-board EEPROM
    • PXE and iSCSI boot (64 Mbit serial flash)
    • IEEE 1588/802.1AS Precision Time Protocol (PTP)
    • Front I/O via 2 RJ45 connectors and 2 SFP+ connectors
    VIEW FULL SPECIFICATIONS
  • TXMC633 I User Programmable XMC FPGA Module with TTL and Differential I/O

    TXMC633

    Reconfigurable FPGA with TTL and Differential I/O
    • Standard XMC module
    • User configurable FPGA (AMD Spartan ™ 6)
    • 128 Mbyte, 16 bit wide DDR3 SDRAM
    • 64 TTL I/O line or 32 differential I/O lines (EIA-422 / EIA485 compatible) or 32 differential I/O lines (M-LVDS) or 32 TTL I/O line and 16 differential I/O lines
    • I/O direction is individually programmable
    • On board termination resistors for differential I/O
    • Front panel I/O (HD68 SCSI-3 type connector) and rear I/O via P14 and P16
    VIEW FULL SPECIFICATIONS
  • TXMC635 I User Programmable FPGA XMC Module with Analog Input (16 bit), Analog Output (16 bit) and TTL I/O

    TXMC635

    Reconfigurable FPGA with Analog Input (16 bit), Analog Output (16 bit) and TTL I/O
    • Standard XMC module
    • User configurable FPGA (AMD Spartan ™ 6)
    • 128 Mbyte, 16 bit wide DDR3 SDRAM
    • 48 TTL I/O line
      • I/O direction is individually programmable
      • ESD protected
    • 32 channels 16 bit ADC
      • Offering single-ended and differential mode
      • 7 individually selectable voltage input ranges (up to ±24.576 V)
      • Sampling rate up to 1 Msps
    • 8 channels 16 bit DAC
      • 3 selectable voltage output ranges (up to ±10.5263 V)
      • 10 μs conversion time
    • Front panel I/O (VHD100 - 0.8 mm pitch connector) and rear I/O via P14 and P16
    VIEW FULL SPECIFICATIONS
  • TPCE275 I PCI Express x1, Gen 1 XMC Carrier

    TPCE275

    PCI Express x1, Gen 1 XMC Carrier
    • Standard height PCI Express Revision 1.1 compatible module
    • Cost effective solution to provide I/O in PCI Express environment
    • Flexible I/O (TEWS offers a wide range of I/O XMCs)
    • Supports 1 single-width XMC
    • Provides front panel I/O
    • Provides XMC P14 rear I/O through VME P2 connector
    • Provides XMC P16 rear I/O through two 50-pin flat cable connectors
    • PCI Express x1 from host board to XMC
    • PCIe Redriver allows safe operation of XMC module in distributed PCIe systems
    VIEW FULL SPECIFICATIONS
  • TPCE277 I PCI Express x1, Gen3 XMC Carrier

    TPCE277

    PCI Express x1, Gen3 XMC Carrier
    • Standard height PCI Express Revision 3.0 compatible module
    • Cost effective solution to provide I/O in PCI Express environment
    • Flexible I/O (TEWS offers a wide range of I/O XMCs)
    • Supports 1 single-width XMC
    • Provides front panel I/O
    • PCI Express x1 from host board to XMC
    • PCIe Gen3 Redriver allows safe operation of XMC module in distributed PCIe systems
    VIEW FULL SPECIFICATIONS
  • TPCE278 I PCI Express x4, Gen3 XMC Carrier

    TPCE278

    PCI Express x4, Gen3 XMC Carrier
    • Standard height PCI Express Revision 3.0 compatible module
    • Cost effective solution to provide I/O in PCI Express environment
    • Flexible I/O (TEWS offers a wide range of I/O XMCs)
    • Supports 1 single-width XMC
    • Provides front panel I/O
    • Provides XMC P14 rear I/O through Tyco AMPMODU System 50 0.050x0.100 flat ribbon cable connector
    • Provides XMC P16 rear I/O through two Samtec QTH-DP 0.50mm Q Pairs High Speed Ground Plane Socket Strip, Differential Pair connector
    • PCI Express x4 from host board to XMC
    • PCIe Gen3 Redriver allows safe operation of XMC module in distributed PCIe systems
    VIEW FULL SPECIFICATIONS
  • TPCE280 I PCI Express x8, Gen3 XMC Carrier

    TPCE280

    PCI Express x8, Gen3 XMC Carrier
    • Standard height, half length PCI Express Revision 3.0 compatible module
    • Cost effective solution to provide I/O in PCI Express environment
    • Flexible I/O (TEWS offers a wide range of I/O XMCs)
    • Supports 1 single-width XMC
    • Provides front panel I/O
    • Provides XMC P14 rear I/O through 68-pin ERNI SMC, right angle male, 1.27mm pitch connector
    • Provides XMC P16 rear I/O through two Samtec Firefly UCC8 and UEC5 connectors
    • PCI Express x8 from host board to XMC
    • PCIe Gen3 Redriver allows safe operation of XMC module in distributed PCIe systems
    • Provides a fan mounted under the XMC slot that helps cooling the system
    VIEW FULL SPECIFICATIONS
  • TCPS275 I 3U CompactPCI Serial XMC Module Carrier

    TCPS275

    3U CompactPCI Serial XMC Module Carrier
    • PICMG CPCI-S.0 R2.0 compatible 3U module
    • cost effective solution to provide I/O in CompactPCI Serial environment
    • flexible I/O (TEWS offers a wide range of I/O XMCs)
    • supports one single-width XMC
    • provides front panel I/O
    • PCI Express X4 from host board to XMC
    • PCIe Gen3 Redriver allows safe operation of XMC module in distributed PCIe systems
    VIEW FULL SPECIFICATIONS

  • TXMC385

    Conduction Cooled, 4 Channel 1000BASE-T Ethernet
    • Conduction Cooled single-width XMC module
    • 4 channel 1000BASE-T / 100BASE-TX / 10BASE-T
    • Rear I/O

    Discontinued

    VIEW FULL SPECIFICATIONS
  • TXMC387 I Conduction Cooled 2 Channel 10GBASE-T Ethernet XMC Module

    TXMC387

    Conduction Cooled 2 Channel 10GBASE-T Ethernet
    • Conduction Cooled single-width XMC module
    • 2 channel 10GBASE-T / 1000BASE-T / 100BASE-TX
    • Rear I/O via P16

    Discontinued

    VIEW FULL SPECIFICATIONS

  • TXMC885

    4 Channel 1000BASE-T Ethernet
    • Standard single-width XMC module
    • 4 channel 1000BASE-T / 100BASE-TX / 10BASE-T
    • Front panel I/O (RJ45 connectors)

    Discontinued

    VIEW FULL SPECIFICATIONS