Cable Kit for Modules with Pico-Clasp Connector

  • Pico-Clasp Terminal Block
    • 30 pin terminal block
    • Pico-Clasp connector
  • Pico-Clasp Cable Harness, 500mm
    • 30 pol. Pico-Clasp harness to Pico-Clasp harness
    • Twisted pairs
    • Cable length: 0.5 m
  • Maximum voltage is 50 V DC

Product status: Active

The TA309 cable kit combines the TA205 Pico-Clasp Terminal Block and the TA111 Pico-Clasp cable harness. It is used as a standard interface to connect TEWS modules with Pico-Clasp connector to other system devices. The TA309 Cable Kit is therefore an essential wiring interface for prototyping and in the same way for machines and peripheral equipment.

Always two wires of the 30 pin Pico-Clasp cable harness are constructed as twisted pairs (1 and 2, 3 and 4, ...., 29 and 30).

The cable length is 0.5 m and the permissible maximum voltage for the TA111 is 50V DC.

The Pico-Clasp Terminal Block has a universal socket and may simply mount on standard EM mounting rails as a compact terminal strip. Screw connections of the used terminal block have a nominal cross section of 2.5 mm².

An additional screw connector provides a possibility to connect i.e. a cable shield with an external case ground.



Cable Kit for Modules with Pico-Clasp Connector (TA111-10R and TA205-10R)

TA205-10R: Pico-Clasp Terminal Block (30 pin)
TA111-10R: 30 pol. Pico-Clasp harness to Pico-Clasp harness; Twisted pairs; 0.5 m; 50 V DC

User Manual

User Manual - Issue 1.0.0