Showing 1–12 of 17 results
-
TXMC375
Conduction Cooled XMC with 8 Channel RS232/RS422/RS485 Programmable Serial Interface
- Conduction cooled XMC module
- 8 channels with programmable RS232 / RS422 / RS485 interfaces
- High performance asynchronous serial interface (up to 10 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 256 byte FIFO
- P14 I/O or P16 I/O
-
TXMC376
Conduction Cooled XMC with 4 Channel RS232/RS422/RS485 Programmable Serial Interface
- Conduction cooled XMC module
- 4 channels with programmable RS232 / RS422 / RS485 interfaces
- High performance asynchronous serial interface (up to 10 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 256 byte FIFO
- P14 I/O or P16 I/O
-
TXMC395
Conduction Cooled, 4 Channel 1000BASE-T Ethernet
- Conduction Cooled single-width XMC module
- 4 channel 1000BASE-T / 100BASE-TX / 10BASE-T
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- PXE and iSCSI boot (16 Mbit serial flash)
- IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping
- Rear I/O via P16 - 2 channels mapped in X12d range and 2 channels mapped in X8d range (VITA46.9)
-
TXMC463
4 Channel RS232/RS422 Serial Interface (RJ45)
- Standard XMC module
- 4 channels RS232 and/or RS422 interfaces
- High performance asynchronous serial interface (up to 15.625 Mbps)
- Hardware handshake and full modem support available
- 256 byte FIFO
- Front panel (4 RJ45 connectors)
-
TXMC465
8 Channel RS232/RS422/RS485 Programmable Serial Interface
- Standard XMC module
- 8 channels with programmable RS232 / RS422 / RS485 interfaces
- High performance asynchronous serial interface (up to 10 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 256 byte FIFO
- Front panel I/O (HD50 SCSI-2 type connector)
- Optional P14 I/O or P16 I/O
-
TXMC590
16 Channel Thermo-/Strain-Measurement XMC
- Standard Single width XMC module
- 16 independent measurement channels
- Differential analog input
- Differential sensor excitation output
- Each channel is seperately configurable
- Supports thermocouple measurements
- Supported cold junction temperature sensors
- A second channel
- An onboard I2C temperature sensor
- An external I2C temperature sensor
- Supports measurement by resistive sensors and thermistors
- Supports strain gauges
- Quarter-, half- and full bridges are supported
- Front panel I/O (3M Mini D Ribbon connector, 68 pol.)
-
TXMC638
Reconfigurable FPGA with Analog Input
- Standard XMC module
- User configurable FPGA (Xilinx Kintex-7)
- 1 Gbyte, 32 bit wide DDR3 SDRAM
- 24 channels 16 bit ADC
- Offering single-ended and differential mode
- single-ended voltage input ranges (±2.5 V)
- differential voltage input ranges (±5 V)
- Sampling rate up to 5 Msps
- Digital rear I/O
- 64 single ended digital I/O lines (LVCMOS24) or 32 differential digital I/O lines (LVDS25)
- Front panel I/O (Rugged EdgeRate connector) and rear I/O via P14 and P16
-
TXMC888
2 Channel SFP+ 10 Gigabit Ethernet
- Standard single-width XMC module
- 2 channel SFP+ 10 Gigabit
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- PXE and iSCSI boot (1 Mbit serial flash)
- Configuration data (128 Kbit EEPROM)
- IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Q VLAN
- Front panel I/O (2 SFP+ connectors)
-
TXMC889
4 Channel SFP Gigabit Ethernet
- Short single-width XMC module
- 4 channel SFP Gigabit
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- PXE and iSCSI boot (1 Mbit serial flash)
- Configuration data (128 Kbit EEPROM)
- IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Q VLAN
- Front panel I/O (4 SFP connectors)
-
TXMC895
4 Channel 1000BASE-T Ethernet
- Short single-width XMC module
- 4 channel 1000BASE-T / 100BASE-TX / 10BASE-T
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- PXE and iSCSI boot (16 Mbit serial flash)
- IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping
- Front I/O via 4 RJ45 connectors
-
TXMC633
Reconfigurable FPGA with TTL and Differential I/O
- Standard XMC module
- User configurable FPGA (Xilinx Spartan-6)
- 128 Mbyte, 16 bit wide DDR3 SDRAM
- 64 TTL I/O line or 32 differential I/O lines (EIA-422 / EIA485 compatible) or 32 differential I/O lines (M-LVDS) or 32 TTL I/O line and 16 differential I/O lines
- I/O direction is individually programmable
- On board termination resistors for differential I/O
- Front panel I/O (HD68 SCSI-3 type connector) and rear I/O via P14 and P16
-
TXMC635
Reconfigurable FPGA with Analog Input (16 bit), Analog Output (16 bit) and TTL I/O
- Standard XMC module
- User configurable FPGA (Xilinx Spartan-6)
- 128 Mbyte, 16 bit wide DDR3 SDRAM
- 48 TTL I/O line
- I/O direction is individually programmable
- ESD protected
- 32 channels 16 bit ADC
- Offering single-ended and differential mode
- 7 individually selectable voltage input ranges (up to ±24.576 V)
- Sampling rate up to 1 Msps
- 8 channels 16 bit DAC
- 3 selectable voltage output ranges (up to ±10.5263 V)
- 10 μs conversion time
- Front panel I/O (VHD100 - 0.8 mm pitch connector) and rear I/O via P14 and P16