TA310

Cable Kit for Modules with Samtec Edge Rate Connector

  • RJ45 Terminal Block
    • 8x RJ45 terminal block
    • 68-pin Edge Rate Twinax Cable connector
  • 32 Pair Twinax Cable
    • 32 Pair Twinax Ribbon cable
    • Samtec Rugged EdgeRate® male to Samtec Rugged EdgeRate® male connector
    • Diffential impedance 100 Ω
    • Cable length: 0.6 m

Product status: Active

The TA310 cable kit combines the TA206 RJ45 Terminal Block and the TA112 32 Pair Twinax Cable. It is used as a standard interface to connect TEWS modules with Samtec EdgeRate® connector to other system devices. The TA310 Cable Kit is therefore an essential wiring interface for prototyping and in the same way for machines and peripheral equipment.

The TA206 is used as a standard interface for a switch cabinet to connect a TEWS module with a Samtec 0.8mm EdgeRate® Twinax Cable via 8 RJ48 connectors with other system devices. Two mounting holes of UNC4-40 are provided for the cable connection.

The TA206 has a universal socket and may simply mount on standard EM mounting rails as a compact terminal strip.

An additional screw connector provides a possibility to connect the shield of the 8 port RJ45 connector to external case ground.

The TA112 is a 32 Pair Twinax Ribbon cable that allows easy access to TEWS modules with Samtec Rugged EdgeRate® female connector. It provides Pin 1 to Pin N-1 connection between its connectors. Always two wires are constructed as twinax cable.

The differential impedance of the twinax cable is 100 Ohm and the operating temperature is -25 °C to +125°C.

The cable length is 0.6 m and the permissible maximum voltage for the TA112 is 30V DC.

PRODUCT VARIATIONS

TA310-10R

Cable Kit for Modules with Samtec Edge Rate Connector (TA112-10R and TA206-10R)

TA206-10R: Twinax Cable Terminal Block with 8x RJ45 Connectors
TA112-10R: 32 Pair Twinax Ribbon cable; Samtec Rugged EdgeRate® male to Samtec Rugged EdgeRate® male connector; Diffential impedance 100 Ω; 0.6 m

User Manual

User Manual - Issue 1.0.0