TPIM006

PIM for Gigabit Ethernet PMCs

  • Standard single-width PIM I/O module
  • 4 RJ45 connectors
  • Distributes signals of TEWS’ Gigabit Ethernet PMC modules
  • Optimized for differential Ethernet signals

Product status: Active

The TPIM006 is a PMC I/O Module (PIM) compatible module providing easy access to the PMC back I/O lines of PMC carriers when used on a PIM carrier.

The TPIM006 distributes the Ethernet signals of TEWS' Gigabit Ethernet PMC modules with P14 back I/O to RJ45 connectors located in the front panel of the PIM module.

Impedance mismatches, caused by CMC connectors and backplane connectors, lead to signal distortion of the Ethernet signals. To reduce these effects, the routing on the TPIM006 is optimized for differential Ethernet signals.

Additionally, common mode choke filters are placed into the Ethernet signal lines to improve signal quality by suppressing common mode noise on the Ethernet signal lines.

The TPIM006-10R reproduces the front I/O signal mapping of TEWS' four channel 10/100/1000 Mbit/s Ethernet adapter PMC in its RJ45 connectors when used with the TPMC895-11R or TPMC395-10R for example.

The module meets the requirements to operate in extended temperature range from -40°C to +85°C.

Mechanical Interface PMC I/O Module (PIM) Interface conforming to VITA 36 199X Draft 0.1

Standard single-width (69 mm x 74 mm)

Common Mode Choke Filters For each interface: LG01-0356N2 (Halo)
Number of Channels 4
I/O Connector RJ45 (TE Connectivity 406732 or compatible)
Temperature Range Operating: -40°C to +85°C
Storage: -40°C to +85°C
MTBF 758000 h
Humidity 5-95% non condensing
Weight 44 g

PRODUCT VARIATIONS

TPIM006-10R

PIM for Gigabit Ethernet PMCs

4 Ethernet Interfaces; 10/100/1000 Mbit/s, RJ45 connectors

Data Sheet

Data Sheet - Issue 1.0.1

User Manual

User Manual - Issue 1.0.1