Showing 1–12 of 156 results
-
QMC Starter Kit
Make your first steps with the new VITA 93 - QMC mezzanine standard
VIEW FULL SPECIFICATIONS- Quad UART QMC
- Single size QMC Module
- Multiprotocol transceiver offering RS232/RS422/RS485
- Operating temperature -40 °C to +85 °C
- Air-Cooled
- Dual QMC Carrier
- Low-Profile PCIe Card
- 2 QMC sites
- VHDCI68 Front I/O Connector
- Operating temperature -40 °C to +85 °C
- Cable Kit
- 1.8 m cable with VHD68 SCSI-V male and HD68 SCSI-3 male type connector
- 68 pin terminal block
- Device Driver
- Quad UART QMC
-
TPCE210
PCI Express x4, Gen 2, Dual QMC Carrier
VIEW FULL SPECIFICATIONS- Low-profile PCI Express Revision 2.0 compatible module
- Cost effective solution to provide I/O in PCI Express environment
- Flexible I/O (TEWS offers a wide range of QMCs)
- Supports two single QMCs or one double QMC
- Provides QMC front panel I/O via VHDCI-68 Connector
- Management Controller for surveillance of QMC health status
-
TQMC400
4 Channel Full-Modem RS232/RS422/RS485 Programmable Serial Interface
VIEW FULL SPECIFICATIONS- Standard single QMC module conforming to VITA 93.0
- 4 UART channels with programmable RS232 / RS422 / RS485 interfaces
- High performance asynchronous serial interface (up to 20 Mbps)
- Software selectable 120 Ω Termination for each RS422/RS485 channel
- Hardware handshake support available
- Half-duplex mode available
- 256 byte FIFO
-
TQMC401
4 Channel High Speed Sync/Async Serial Interface
VIEW FULL SPECIFICATIONS- Standard single QMC module conforming to VITA 93.0
- 4 channels high speed serial data communication
- Several communication protocols
- asynchronous (with oversampling)
- isochronous
- HDLC
- 512 longword FIFO (512 x 32 bit) per channel
- DMA support
- Different signal encodings (NRZ, NRZI, FM0, FM1 and Manchester)
- Multiple clock sources (for a wide bitrate spectrum)
-
TQMC600
Reconfigurable FPGA with Digital I/O
VIEW FULL SPECIFICATIONS- Standard single QMC module conforming to VITA 93.0
- User programmable FPGA
- 32 TTL lines, 5 V tolerant or 16 differential I/O lines (EIA-422 / EIA-485 compatible) or 16 differential Multipoint-LVDS lines
- ESD protected I/O lines
- Each I/O line is individually configurable (e.g. direction)
- 3 state TTL output (high, low, and tristate)
- Onboard termination for differential I/O lines
-
TQMC700
Reconfigurable FPGA with AD/DA & Digital I/O
VIEW FULL SPECIFICATIONS- Standard single QMC module conforming to VITA 93.0
- User programmable FPGA
- 16 TTL lines
- 5 V-tolerant
- ESD-protected
- Each I/O line is individually configurable (e.g. direction)
- 3 output states (high, low, and tristate)
- 8 channels 18 bit ADC
- Offering single-ended and differential mode
- 8 individually selectable voltage input ranges (up to ±12.5 V)
- Sampling rate up to 1 Msps
- 4 channels 16 bit DAC
- 4 individually selectable voltage output ranges (up to ±10.8 V)
- 10 μs conversion time
- Factory correction data for ADC and DAC
-
TQMC701
8 Single-Ended / Differential A/D Channels, 4 D/A Channels and 16 Digital I/O Channels
VIEW FULL SPECIFICATIONS- Standard single QMC module conforming to VITA 93.0
- PCI Express 2.1 compliant interface
- DMA support
- 8 channels 16 bit analog input
- Offering single-ended and differential mode
- 8 individually selectable voltage input ranges (up to ±12.5 V)
- Sampling rate up to 1 Msps
- 4 channels 16 bit analog output
- 4 individually selectable voltage output ranges (up to ±10.8 V)
- 10 μs conversion time
- 16 TTL lines
- 5 V-tolerant
- ESD-protected
- Each I/O line is individually configurable (e.g. direction)
- 3 output states (high, low, and tristate)
- Factory correction data for ADC and DAC
-
TQMC800
1 Channel 1000BASE-T Ethernet
VIEW FULL SPECIFICATIONS- Standard single QMC module conforming to VITA 93.0
- One Channel 1000BASE-T / 100BASE-TX / 10BASE-T Ethernet
- PXE and iSCSI boot (16 Mbit serial flash)
- IEEE 1588/802.1AS Precision Time Protocol (PTP)
- IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping
-
TXMC375
Conduction Cooled XMC with 8 Channel RS232/RS422/RS485 Programmable Serial Interface
VIEW FULL SPECIFICATIONS- Conduction cooled XMC module
- 8 channels with programmable RS232 / RS422 / RS485 interfaces
- High performance asynchronous serial interface (up to 10 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 256 byte FIFO
- P14 I/O or P16 I/O
-
TXMC376
Conduction Cooled XMC with 4 Channel RS232/RS422/RS485 Programmable Serial Interface
VIEW FULL SPECIFICATIONS- Conduction cooled XMC module
- 4 channels with programmable RS232 / RS422 / RS485 interfaces
- High performance asynchronous serial interface (up to 10 Mbps)
- Hardware handshake support available
- Half-duplex mode available
- 256 byte FIFO
- P14 I/O or P16 I/O
-
TXMC395
Conduction Cooled, 4 Channel 1000BASE-T Ethernet
VIEW FULL SPECIFICATIONS- Conduction Cooled single-width XMC module
- 4 channel 1000BASE-T / 100BASE-TX / 10BASE-T
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- PXE and iSCSI boot (16 Mbit serial flash)
- IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping
- Rear I/O via P16 - 2 channels mapped in X12d range and 2 channels mapped in X8d range (VITA46.9)
-
TXMC397
Conduction Cooled, 2 Channel 10GBASE-T Ethernet
VIEW FULL SPECIFICATIONS- Conduction Cooled single-width XMC module
- 2 channel 10GBASE-T / NBASE-T / 1000BASE-T / 100BASE-TX
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- PXE and iSCSI boot (64 Mbit serial flash)
- IEEE 1588/802.1AS Precision Time Protocol (PTP)
- Rear I/O via P16 – Both channels mapped in X12d range or both channels mapped in X8d range (VITA46.9)
