Showing 13–24 of 299 results

• 

  TQMC604

  32 Digital Outputs (5-36 V, 0.15 A), Isolated

  • Standard single-width QMC module conforming to VITA 93.0
  • 32 digital outputs
  • Up to 4 µs update rate
  • High- or low-side switching
  • 0.15 A per output
  • 36 V maximum supply voltage
  • Outputs withstand up to 65 V
  • Galvanic isolation
  VIEW FULL SPECIFICATIONS
• 

  TQMC700

  Reconfigurable FPGA with AD/DA & Digital I/O

  • Standard single QMC module conforming to VITA 93.0
  • User programmable FPGA
  • 16 TTL lines
    • 5 V-tolerant
    • ESD-protected
    • Each I/O line is individually configurable (e.g. direction)
    • 3 output states (high, low, and tristate)
  • 8 channels 18 bit ADC
    • Offering single-ended and differential mode
    • 8 individually selectable voltage input ranges (up to ±12.5 V)
    • Sampling rate up to 1 Msps
  • 4 channels 16 bit DAC
    • 4 individually selectable voltage output ranges (up to ±10.8 V)
    • 10 μs conversion time
  • Factory correction data for ADC and DAC
  VIEW FULL SPECIFICATIONS
• 

  TQMC701

  8 Single-Ended / Differential A/D Channels, 4 D/A Channels and 16 Digital I/O Channels

  • Standard single QMC module conforming to VITA 93.0
  • PCI Express 2.1 compliant interface
  • DMA support
  • 8 channels 16 bit analog input
    • Offering single-ended and differential mode
    • 8 individually selectable voltage input ranges (up to ±12.5 V)
    • Sampling rate up to 1 Msps
  • 4 channels 16 bit analog output
    • 4 individually selectable voltage output ranges (up to ±10.8 V)
    • 10 μs conversion time
  • 16 TTL lines
    • 5 V-tolerant
    • ESD-protected
    • Each I/O line is individually configurable (e.g. direction)
    • 3 output states (high, low, and tristate)
  • Factory correction data for ADC and DAC
  VIEW FULL SPECIFICATIONS
• 

  TQMC800

  1 Channel 1000BASE-T Ethernet

  • Standard single QMC module conforming to VITA 93.0
  • One Channel 1000BASE-T / 100BASE-TX / 10BASE-T Ethernet
  • PXE and iSCSI boot (16 Mbit serial flash)
  • IEEE 1588/802.1AS Precision Time Protocol (PTP)
  • IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping
  VIEW FULL SPECIFICATIONS
• 

  TQMC801

  1000BASE-KX Ethernet

  • Standard single-width QMC module conforming to VITA 93.0
  • 1000BASE-KX Ethernet
  • PXE and iSCSI boot (16 Mbit serial flash)
  • IEEE 1588/802.1AS Precision Time Protocol (PTP)
  • IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping
  VIEW FULL SPECIFICATIONS
• 

  TQMC802

  4 Channel Isolated CAN FD

  • Standard single-width QMC module conforming to VITA 93.0
  • 4 individual channels CAN FD
  • Data rates up to 5 Mbps
  • Galvanic isolation of all channels from the system and against each other
  • Classic CAN backwards compatible
  • Fault protected transceivers
  • Software selectable termination
  VIEW FULL SPECIFICATIONS
• 

  TVNX210

  VNX+ Carrier with 2 QMC Sites, PCIe Gen 3 x4, Rear I/O

  • VNX+ 19mm Plug-In Module (ANSI/VITA 90.0-2026)
  • Dual QMC Carrier VITA 90.1 slot profile
  • Flexible and modular solution to provide I/O in the VNX+ environment
  • Supports two single QMCs or one double QMC
  • 2 single-width QMC Sites
    • PCIe Gen3 x4 from host to QMCs
    • Full QMC I/O to VNX+ backplane
  • VITA 46.11 Management Controller
  VIEW FULL SPECIFICATIONS
• 

  TXMC375

  Conduction Cooled XMC with 8 Channel RS232/RS422/RS485 Programmable Serial Interface

  • Conduction cooled XMC module
  • 8 channels with programmable RS232 / RS422 / RS485 interfaces
  • High performance asynchronous serial interface (up to 10 Mbps)
  • Hardware handshake support available
  • Half-duplex mode available
  • 256 byte FIFO
  • P14 I/O or P16 I/O
  VIEW FULL SPECIFICATIONS
• 

  TXMC376

  Conduction Cooled XMC with 4 Channel RS232/RS422/RS485 Programmable Serial Interface

  • Conduction cooled XMC module
  • 4 channels with programmable RS232 / RS422 / RS485 interfaces
  • High performance asynchronous serial interface (up to 10 Mbps)
  • Hardware handshake support available
  • Half-duplex mode available
  • 256 byte FIFO
  • P14 I/O or P16 I/O
  VIEW FULL SPECIFICATIONS
• 

  TXMC395

  Conduction Cooled, 4 Channel 1000BASE-T Ethernet

  • Conduction Cooled single-width XMC module
  • 4 channel 1000BASE-T / 100BASE-TX / 10BASE-T
  • IPMI resource: FRU hardware definition information stored in on-board EEPROM
  • PXE and iSCSI boot (16 Mbit serial flash)
  • IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping
  • Rear I/O via P16 - 2 channels mapped in X12d range and 2 channels mapped in X8d range (VITA46.9)
  VIEW FULL SPECIFICATIONS
• 

  TXMC397

  Conduction Cooled, 2 Channel 10GBASE-T Ethernet

  • Conduction Cooled single-width XMC module
  • 2 channel 10GBASE-T / NBASE-T / 1000BASE-T / 100BASE-TX
  • IPMI resource: FRU hardware definition information stored in on-board EEPROM
  • PXE and iSCSI boot (64 Mbit serial flash)
  • IEEE 1588/802.1AS Precision Time Protocol (PTP)
  • Rear I/O via P16 – Both channels mapped in X12d range or both channels mapped in X8d range (VITA46.9)
  VIEW FULL SPECIFICATIONS
• 

  TXMC463

  4 Channel RS232/RS422 Serial Interface (RJ45)

  • Standard XMC module
  • 4 channels RS232 and/or RS422 interfaces
  • High performance asynchronous serial interface (up to 15.625 Mbps)
  • Hardware handshake and full modem support available
  • 256 byte FIFO
  • Front panel (4 RJ45 connectors)
  VIEW FULL SPECIFICATIONS