Showing 37–48 of 89 results
-
TPMC634
Re-Configurable FPGA with 64 TTL I/O / 32 Diff. I/O
$1.00- Standard single-width PMC module
- User configurable FPGA (Xilinx Spartan-6)
- 64 TTL I/O lines or 32 differential I/O lines (EIA-422 / EIA485 compatible) or 32 differential I/O lines (M-LVDS) or 32 TTL I/O line and 16 differential I/O lines
- I/O direction is individually programmable
- Configurable pull voltage for TTL I/O
- On board termination resistors for differential I/O
- Auto-configurable User FPGA
- User FPGA and SPI flash are in-system programmable via PCI bus
- User FPGA JTAG port via on-board header
-
TPMC670
16 (8) Digital Inputs 24V, 16 (8) Digital Outputs 24V 0.5A
- Standard single-width 32 bit PMC module
- 16 or 8 digital inputs (24 V)
- Defined switching points
- Programmable debounce circuit
- Input events can generate interrupts
- 16 or 8 digital high side switches (24 V / 0.5 A)
- Short-circuit protection
- Thermal overload protection
- Hardware watchdog
- All lines are galvanically isolated from system by optocouplers
- Input and switching lines are isolated in groups of 4 against each other
- Front panel I/O or P14 I/O
-
TPMC671
16 Digital Inputs 24V, 16 Digital Outputs 24V 0.5A
- Standard single-width 32 bit PMC module
- 16 digital inputs (24 V)
- Defined switching points
- Programmable debounce circuit
- Input events can generate interrupts
- 16 digital high side or low side switches (24 V / 0.5 A)
- Short-circuit protection
- Thermal overload protection
- Hardware watchdog
- All lines are galvanically isolated from system by optocouplers
- Input lines are potential free against each other
- Switching lines are isolated in groups of 4 against each other
- Front panel I/O or P14 I/O
-
TPMC680
64 Digital Inputs/Outputs, 8x 8-bit Port
- Standard single-width 32 bit PMC module
- 64 TTL I/O lines (8 x 8 bit ports)
- Programmable I/O direction (port wise)
- ESD and overvoltage protection
- Input events can be enabled and detected individually for each I/O line
- All 64 I/O lines are synchronously readable and writable (byte I/O mode)
- Handshake lines available in port mode
- Front panel I/O via HD68 SCSI-3 type connector
- Rear I/O via P14
-
TPMC681
64 bit TTL I/O (Bit I/O)
- Standard single-width 32 bit PMC module
- 64 TTL I/O lines
- Programmable I/O direction (input, output, tri-state)
- Selectable pull-up voltages (+3.3 V or +5 V)
- ESD protection
- Input events can be enabled and detected individually for each I/O line
- Front panel I/O via HD68 SCSI-3 type connector
- Rear I/O via P14
-
TPMC682
Three 16 bit I/O Ports with 512 Word FIFO and Handshake
- Standard single-width 32 bit PMC module
- 3 port 16 bit TTL I/O
- Programmable I/O direction (port wise)
- Interlocked or pulse handshake protocol
- 512 word FIFO per port
- ESD protection
- Front panel I/O via HD68 SCSI-3 type connector
- Rear I/O via P14
-
TPMC685
16 x 8 Bit Digital Inputs/Outputs (5V TTL)
- Standard single-width 32 bit PMC module
- 128 TTL I/O lines (16 x 8 bit ports)
- Programmable I/O direction (port wise)
- ESD and overvoltage protection
- Software selectable pull-up / pull-down
- Input events can be enabled and detected individually for each I/O line
- User configurable input filter
- User configurable output watchdog
- All 128 I/O lines are synchronously readable and writable
- 2 internal timers
- Front panel I/O via HD68 SCSI-3 type connector and rear I/O via P14
-
TPMC700
32 (16) Digital Outputs 24 V / 0.5 A
- Standard single-width 32 bit PMC module
- 32 or 16 digital high side switches (24 V / 0.5 A)
- Short-circuit protection
- Thermal overload protection
- Hardware watchdog
- All lines are galvanically isolated from system by optocouplers
- Front panel I/O or P14 I/O
-
TPMC810
Two Independent Channel Extended CAN Bus
- Standard single-width 32 bit PMC module
- 2 independent CAN bus channels
- CAN specification 2.0B supported
- On board termination can be configured
- Front panel I/O (2 DB9 male connectors) and P14 I/O
-
TPMC851
16 bit ADC, 16 bit DAC, TTL I/O, Counters
- Standard single-width 32 bit PMC module
- 32 (single-ended) or 16 (differential) channels analog input (multiplexed)
- 16 bit A/D converter
- ±1.25 V, ±2.5 V, ±5 V and ±10 V ranges
- Overvoltage protected multiplexer (70 Vpp)
- Sequencer mode
- 8 channels analog output
- 16 bit D/A converter
- ±10 V ranges
- Sequencer mode
- Simultaneous Update
- 16 digital I/O lines
- TTL tri-state
- ESD protected
- Input debouncer
- Input event detection
- 2 counters (32 bit)
- Front panel I/O (HD68 SCSI-3 type connector)
-
TPMC861
4 Channel Isolated Serial Interface RS422/RS485
- Standard single-width 32 bit PMC module
- 4 channels RS422 / RS485-HD / RS485-FD interfaces
- Channels are isolated against system and each other
- High performance asynchronous serial interface (up to 460.8 Kbps)
- 128 byte FIFO
- Front panel I/O (DB25 connector) and P14 I/O
-
TPMC863
4 Channel High Speed Synch/Asynch Serial Interface
- Standard single-width 32 bit PMC module
- 4 channels high speed serial data communication
- A wide range of I/O interfaces individually programmable for each channel
- Several communication protocols
- asynchronous (with oversampling)
- isochronous
- HDLC
- 512 longword FIFO (512 x 32 bit) per channel
- DMA support
- Different signal encodings (NRZ, NRZI, FM0, FM1 and Manchester)
- Multiple clock sources (for a wide bitrate spectrum)
- Front panel I/O via HD68 SCSI-3 type connector
- Rear I/O via P14