TPIM007

PIM for Gigabit Ethernet XMCs

  • Standard single-width PIM I/O module
  • 4 RJ45 connectors
  • Distributes signals of TEWS’ Gigabit Ethernet XMC modules
  • Optimized for differential Ethernet signals

Product status: Active

The TPIM007 is a PMC I/O Module (PIM) compatible module providing easy access to the XMC back I/O lines of XMC carriers when used on a PIM carrier.

The TPIM007 distributes the Ethernet signals of TEWS' Gigabit Ethernet XMC modules with P16 back I/O to RJ45 connectors located in the front panel of the PIM module.

Impedance mismatches, caused by CMC connectors and backplane connectors, lead to signal distortion of the Ethernet signals. To reduce these effects, the routing on the TPIM007 is optimized for differential Ethernet signals.

Additionally, common mode choke filters are placed into the Ethernet signal lines to improve signal quality by suppressing common mode noise on the Ethernet signal lines.

The TPIM007-10R reproduces the front I/O signal mapping of TEWS' four channel 10/100/1000 Mbit/s Ethernet adapter XMC in its RJ45 connectors when used with the TXMC395-10R for example.

The module meets the requirements to operate in extended temperature range from -40°C to +85°C.

Mechanical Interface PMC I/O Module (PIM) Interface conforming to VITA 36 199X Draft 0.1

Standard single-width (69 mm x 74 mm)

Common Mode Choke Filters For each interface: LG01-0356N2 (Halo)
Number of Channels 4
I/O Connector RJ45 (TE Connectivity 406732 or compatible)
Temperature Range Operating: -40°C to +85°C
Storage: -40°C to +85°C
MTBF 667000 h
Humidity 5-95% non condensing
Weight 46 g

PRODUCT VARIATIONS

TPIM007-10R

PIM for Gigabit Ethernet XMCs

4 Ethernet Interfaces; 10/100/1000 Mbit/s, RJ45 connectors; for XMCs

Data Sheet

Data Sheets - Issue 1.0.2

User Manual

User Manual - Issue 1.0.1