TPMC553

32 /16 Channels of 16 bit D/A

  • Standard single-width 32 bit PMC module
  • 32 or 16 D/A channels
  • 16 bit D/A converter
  • Multiple software selectable output ranges (up to ±10.8 V)
  • Supports simultaneous update
  • Supports sequencer mode
    • Channels are individually selectable
    • Programmable cycle time (10 μs up to 167 s)
    • Reduces CPU load
  • Factory calibration data available in EEPROM
  • Front panel I/O (HD68 SCSI3 type connector)

Product status: Active

The TPMC553 is a standard single-wide 32 bit PMC module and provides 32/16 channels of 16 bit analog outputs. All signals are accessible through a HD68 SCSI3 type front I/O connector.

The software selectable output voltage ranges are 0-5V, 0-10V, 0-10.8V, ±5V, ±10V or ±10.8V. The output voltage range can be individually set per channel. The conversion time is typ. 10 µs and the DAC outputs are capable to drive a load of 2kohm, with a capacitance up to 4000pF.

Beside of an individual channel update, the double buffered DACs allow simultaneous update of all channels. Additionally a sequencer on the TPMC553 allows to periodically update enabled channels with a sequence timer range that extends from 10µs to 167s.

Each TPMC553 is factory calibrated. The calibration information is stored in an on board serial EEPROM unique to each PMC module.

Software Support (TDRV016-SW-xx) is available for different operating systems.

Mechanical Interface PCI Mezzanine Card (PMC) Interface confirming to IEEE P1386/P1386.1; Single Size
Electrical Interface PCI Rev. 2.2 compliant; 33 MHz / 32 bit PCI; 3.3V and 5V PCI Signaling Voltage
PCI Target Chip PCI9030 (PLX Technology)
Quad-DAC AD5754R (Analog Devices)
Number of Channels TPMC553-10x: 32 D/A channels
TPMC553-11x: 16 D/A channels
D/A Resolution 16 bit
D/A Output Voltage Range Selectable: 0V – +5V, 0V – +10V, 0V – +10.8V, ±5V, ±10V, ±10.8V
D/A Output Load Max 2kohm | 4000pF per D/A channel
D/A Output Settling Time Max 10µs
D/A Protection 20mA current limit option, thermal shutdown option
D/A Calibration Calibration data for gain and offset correction
DAC INL/DNL Error ±16/±1 LSB
I/O Connector Front I/O HD68 SCSI-3 (AMP5-787082-7 or compatible)
Power Requirements 200mA typical @ 3.3V
600mA typical@ 5V (±10V output, 2kohm load)
Temperature Range Operating: -40 °C to +85 °C
Storage: -40 °C to +85 °C
Weight 79 g
Humidity 5 – 95% non-condensing
MTBF 1) 683 000 h to 689 000 h

 

1) depends on variant, for further details see User Manual

PRODUCT VARIATIONS

TPMC553-10R

32 Analog Outputs (16 bit)

32 analog outputs; 16 bit; programmable ranges up to +/-10.8 V; immediate or simultaneous load; sequencer mode; factory calibrated; Front I/O via HD68 / SCSI-3 connector

TPMC553-11R

16 Analog Outputs (16 bit)

16 analog outputs; 16 bit; programmable ranges up to +/-10.8 V; immediate or simultaneous load; sequencer mode; factory calibrated; Front I/O via HD68 / SCSI-3 connector

ACCESSORIES

HD68 / SCSI-3 Cable

HD68 / SCSI-3 Terminal Block

Cable Kit for Modules with HD68 / SCSI-3 Connector

PIM I/O Module with 68 pin Connector

SOFTWARE

Device Driver for Multiple Channel 16-bit Analog Output Family

Data Sheet

Data Sheet - Issue 1.0.0

User Manual

User Manual - Issue 1.0.3