TAMC260

1 Slot PMC-Carrier for AMC

  • Cost effective solution to provide I/O in AMC environment
  • Flexible I/O (TEWS offers a wide range of I/O PMCs)
  • Supports one single-width PMC
  • Provides access to the PMC rear I/O (P14)
  • IPMI compliant MMC with temperature monitoring and hot-swap support
  • 33 MHz and 66 MHz PCI frequency
  • Aavailable as mid- and full-size AMC

Product status: Active

The TAMC260 is a standard Mid-Size/Full-Size AMC module that provides one slot for a single-width PMC module used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control.

32 bit PCI accesses are supported on PCI bus with PCI frequency 33 MHz and also 66 MHz. The PLX8112 PCIe-to-PCI bridge provides the real connection between primary PCIe link and the secondary PMC slot. The bridge controls all PCI accesses and the frequency for the PMC access.

The TAMC260 supports front panel I/O, alternatively a 68 pin SCSI-V type connector provides access to the PMC P14 back I/O lines.

The TAMC260 is a versatile solution to upgrade well known legacy I/O solutions to a high performance form factor.

According to AMC.0, the TAMC260 provides an IPMI compliant Module Management Controller (MMC) with temperature monitoring and hot-swap support.

Logic Interface Advanced Mezzanine Card (AMC) Interface confirming to PICMG® AMC.0 R2.
TAMC260-1x: Double-width / Full-size Module
TAMC260-2x: Double-width / Mid-size Module
Electrical Interface PICMG® AMC.1 R1.0; PCIe single lane (x1) port (AMC.1 Type 1 compliant)
IPMI Version 1.5
Status LEDs Blue Hot-Swap LED
Red Failure Indication LED (LED1)
Green Board OK / PMC Activity LED (LED 2)
PCI Express to PCI Bridge PEX8112 (PLX Technology)
Number of PMC Slots 1
Supported PMC Data Width 32 bit
Supported PCI Clock Frequency 33 MHz / 66 MHz
PCI I/O Signaling Voltage 5V and 3.3V
PMC I/O Access Front Panel I/O via VHD68 SCSI-V Connector; P14 Back I/O via front panel connector
Maximum Power for PMC Modules 100 mA typical @ +12V DC (Payload Power)
30 mA typical @ +3.3V DC (Management Power)
Additional power is required by PMC modules
Temperature Range Operating: -40°C to +85°C
Storage: -40°C to +85°C
MTBF 570 000 h
Weight 165 g
Humidity 5-95% non-condensing

PRODUCT VARIATIONS

TAMC260-10R

1 Slot PMC Carrier, Double Full-Size, 5 V PCI I/O signaling voltage

1 Slot PMC Carrier; Double Full-Size; 32 bit; 33/66 MHz; PCIe x1; 5 V PCI I/O signaling voltage; IPMI V1.5 support; Rear I/O via VHD68 SCSI-V type connector; Front Panel LEDs

TAMC260-11R

1 Slot PMC Carrier, Double Full-Size, 3.3 V PCI I/O signaling voltage

1 Slot PMC Carrier; Double Full-Size; 32 bit; 33/66 MHz; PCIe x1; 3.3 V PCI I/O signaling voltage; IPMI V1.5 support; Rear I/O via VHD68 SCSI-V type connector; Front Panel LEDs

TAMC260-20R

1 Slot PMC Carrier, Double Mid-Size, 5 V PCI I/O signaling voltage

1 Slot PMC Carrier; Double Mid-Size; 32 bit; 33/66 MHz; PCIe x1; 5 V PCI I/O signaling voltage; IPMI V1.5 support; Rear I/O via VHD68 SCSI-V type connector; Front Panel LEDs

TAMC260-21R

1 Slot PMC Carrier, Double Mid-Size, 3.3 V PCI I/O signaling voltage

1 Slot PMC Carrier; Double Mid-Size; 32 bit; 33/66 MHz; PCIe x1; 3.3 V PCI I/O signaling voltage; IPMI V1.5 support; Rear I/O via VHD68 SCSI-V type connector; Front Panel LEDs

ACCESSORIES

VHD68 / SCSI-V to HD68 / SCSI-3 Cable

HD68 / SCSI-3 Terminal Block

Cable Kit for Modules with VHD68 / SCSI-V Connector

Data Sheet

Data Sheet - Issue 1.0.1

User Manual

User Manual - Issue 1.0.4