TCPS892

4 Channel 10/100/1000 Mbit/s Ethernet

  • PICMG CPCI-S.0 R2.0 compatible 3U module
  • 4 Ethernet interfaces with auto negotiation
  • Ethernet 10Base-T / 100Base-TX / 1000Base-TX
  • Interfaces are galvanically isolated from the Ethernet controllers
  • P3 rear I/O
  • PXE and iSCSI boot (1 Mbit serial flash equipped)
  • supports IEEE 1588/802.1AS Precision Time Protocol (PTP)
  • LEDs indicate network activities
  • 128 Kbit configuration EEPROM

 

Product status: Active

The TCPS892 is a PICMG CPCI-S.0 R2.0 compatible 3U module providing a four channel Ethernet 10Base-T / 100Base-TX / 1000Base-T interface.

The Intel I350 provides integrated PHYs that support 10, 100 and 1000 Mbit/s transmission rates and is equipped with a 1 Mbit Serial Flash to support PXE and iSCSI boot.

The four Ethernet interfaces of the TCPS892 are capable of performing an auto negotiation algorithm which allows both link-partners to determine the best link-parameters. The TCPS892 supports IEEE 1588/802.1AS Precision Time Protocol (PTP).

The controller is equipped with a 128 Kbit EEPROM storing configuration data. LEDs in the front panel indicate the different network activities.

All ports are galvanically isolated from the Ethernet controllers and are routed to the P3 rear I/O connector.

An accompanying CompactPCI Serial 3U Rear Board TCPS007-TM with reconstruction filters and four RJ45 connectors is available.

Software Support:

o Software support for Intel I310-AM4 at www.intel.com

o For operating systems not supported by Intel, please contact TEWS.

compactPCI Serial Compact Serial 3U Front Board conforming to PICMG CPCI-S.0 R2.0
Electrical Interface PCI Express (Base Specification 2.1) x4 compliant interface
Gigabit Ethernet Controller I350-AM4 (Intel)
Number of Channels 4
I/O Standards 1000Base-T, 100Base-TX, 10Base-T
I/O Connector P3 rear I/O
Power Requirements 400 mA typical @ +12 V DC
Temperature Range Operating: -40°C to + 85°C
Storage: -40°C to + 85°C
MTBF 539000 h

MTBF values shown are based on calculation according to MIL-HDBK-217F and MIL-HDBK-217F Notice 2; Environment: GB 20°C.
The MTBF calculation is based on component FIT rates provided by the component suppliers. If FIT rates are not available, MIL-HDBK-217F and MIL-HDBK-217F Notice 2 formulas are used for FIT rate calculation.

Humidity 5-95 % non-condensing
Weight 151 g

PRODUCT VARIATIONS

TCPS892-10R

4 Channel 10/100/1000 Mbit/s Ethernet

4 Channel 10/100/1000 Mbit/s Ethernet; P3 Rear Connector; 10Base-T / 100Base-TX / 1000Base-T; 1 Mbit serial flash memory (Boot ROM); 128 Kbit EEPROM (configuration data)

ACCESSORIES

Rear I/O Module for Quad 10/100/1000 Ethernet CPCI-S.0 Modules

SOFTWARE

Third Party Device Driver Support

Data Sheet

Data Sheet - Issue 1.0.1

User Manual

User Manual - Issue 1.0.1