Showing 97–108 of 268 results
-
TCP030-TM
Transition Module for 3U cPCI PMC Carrier
VIEW FULL SPECIFICATIONS- 3U CompactPCI Transition Module
- Distributes all 64 I/O lines from CompactPCI RJ2 connector
- HD68 /SCSI-3 type connector in front panel
-
TCP040-TM
PIM Carrier Transition Module for 3U cPCI
VIEW FULL SPECIFICATIONS- 3U CompactPCI Transition Module
- Distributes all I/O lines from CompactPCI RJ2 connector
- All I/O lines are mapped to a PIM module slot
- 1 PIM module slot for flexible I/O connections (TEWS offers a wide range of I/O PIMs)
-
TCP001-FP
Front panel extension for 3U cPCI boards
VIEW FULL SPECIFICATIONS- 6U front panel extension for TEWS' 3U CompactPCI boards
- Avoids shielding disruption in 6U CompactPCI systems
-
TAMC260
1 Slot PMC-Carrier for AMC
VIEW FULL SPECIFICATIONS- Cost effective solution to provide I/O in AMC environment
- Flexible I/O (TEWS offers a wide range of I/O PMCs)
- Supports one single-width PMC
- Provides access to the PMC rear I/O (P14)
- IPMI compliant MMC with temperature monitoring and hot-swap support
- 33 MHz and 66 MHz PCI frequency
- Aavailable as mid- and full-size AMC
-
TAMC261
PMC-Carrier for MTCA.4 Rear-I/O
VIEW FULL SPECIFICATIONS- Cost effective solution to provide I/O in AMC and MTCA.4 environment
- Flexible I/O (TEWS offers a wide range of I/O PMCs)
- Supports one single-width PMC
- Provides access to the PMC rear I/O (P14)
- IPMI compliant MMC with temperature monitoring and hot-swap support
- PCI ip to 64 bit, 66 MHz
- PCI-X up to 64 bit, 133 MHz
- Available as mid- and full-size AMC
-
TAMC532
32 x 12/14 Bit 50/75 Msps ADC for MTCA.4 Rear-I/O
VIEW FULL SPECIFICATIONS- usable in AMC and MTCA.4 environment
- 32 analog input channels
- 75 Msps at 12 bit resolution (optional 50 Msps at 14 bit resolution)
- very powerful on-board clocking structure
- 8 channel trigger I/O to synchronize multiple TAMC532
- flexible interfacing without changing the AMC
- rear I/O via zone 3
- powerful Kintex-7 FPGA allows adaptations to custom requirements
-
TAMC020-TM
MTCA.4 Rear-I/O µRTM for TAMC261
VIEW FULL SPECIFICATIONS- Micro Rear Transition Module compatible to TAMC261
- All P14 I/O lines of the PMC mounted on TAMC261 are distributed
- 1 PIM module slot for flexible read I/O (TEWS offers a wide range of I/O PIMs)
- MTCA.4 compliant
- Provides I2C EEPROM
- Provides I2C temperature sensor
- Provides I2C I/O Extender device
- Available as mid- and full-size
-
TAMC532-TM
32 x Analog-In MTCA.4 µRTM for Class A2.1 for TAMC532
VIEW FULL SPECIFICATIONS- Micro Rear Transition Module compatible to TAMC532
- MTCA.4 compliant
- 32 differential analog inputs
- Filter Block
- Programmable gain
- Programmable Gaussian shaping amplifier
- Pole-Zero is adjustable
- 8 RJ45 connectors
-
TFMC684
32 Differential I/O FPGA Mezzanine Card
VIEW FULL SPECIFICATIONS- FMC Module complying with the ANSI/VITA 57.1
- 32 bit M-LVDS I/O Interface
- 32 bit RS-485/RS-422 I/O Interface
- 32 independent control signals at Low Pin Count FMC Connector
- Converts 32 single-ended data lines into 32 differential pairs
- supports signaling rates up to 200 Mbit/s
- VHDCI-68 Connector in front panel
-
TA101
HD50 / SCSI-2 Cable
VIEW FULL SPECIFICATIONS- HD50 male to HD50 male connector
- Cable length: 1.8 m
- Maximum voltage is 30 V DC
-
TA102
DB25 M/F Cable
VIEW FULL SPECIFICATIONS- DB25 male to DB25 female connector
- Cable length: 1.8 m
- Maximum voltage is 30 V DC
-
TA103
DB25 M/M Cable
VIEW FULL SPECIFICATIONS- DB25 male to DB25 male connector
- Cable length: 1.8 m
- Maximum voltage is 30 V DC
