Showing all 5 results
-
TXMC637
Reconfigurable FPGA with 16x Analog Input 8x Analog Output and 32x Digital I/O
- Standard XMC Module
- User configurable FPGA (AMD Artix™ 7)
- DDR3 SDRAM bank, 256M x 16 bit (512 MB)
- 32 channels 16 bit ADC
- Offering single-ended and differential mode
- Programmable input voltage
- Conversion time: up to 1.1 µs
- Sampling rate up to 1 Msps
- 8 channels single-ended analog output
- 16 bit resolution
- Programmable output voltage: ±10 V, ±5.0 V or ±2.5 V
- Full scale settling time: typ.1 µs
- 32 digital TTL compatible I/O lines
- 16 lines optional configurable as differential RS422 interface
- P14/P16 Rear I/O lines
- 64 single ended or 32 differential rear I/O lines on a rear XMC 64 pin P14 connector
- 4 FPGA Multi-Gigabit-Transceiver on a rear XMC P16 connector
-
TXMC638
Reconfigurable FPGA with Analog Input
- Standard XMC module
- User configurable FPGA (AMD Kintex™ 7)
- 1 Gbyte, 32 bit wide DDR3 SDRAM
- 24 channels 16 bit ADC
- Offering single-ended and differential mode
- single-ended voltage input ranges (±2.5 V)
- differential voltage input ranges (±5 V)
- Sampling rate up to 5 Msps
- Digital rear I/O
- 64 single ended digital I/O lines (LVCMOS25) or 32 differential digital I/O lines (LVDS25)
- Front panel I/O (Rugged EdgeRate connector) and rear I/O via P14 and P16
-
TMPE623
Reconfigurable FPGA with Digital I/O PCIe Mini Card
- Standard PCI Express Mini Card
- User programmable FPGA (AMD Artix™ 7)
- 26 TTL lines (5 V-tolerant) or 13 differential I/O lines (EIA-422 / EIA-485 compatible) or 13 differential Multipoint-LVDS lines
- ESD-protected I/O lines
- Each I/O line is individually configurable (e.g. direction)
- 3 state TTL output (high, low, and tristate)
- 3 TTL pull voltages (GND, 3.3 V, and 5 V)
- Onboard termination for differential I/O lines
- Provides a basic heatsink to facilitate thermal management
-
TMPE627
Reconfigurable FPGA with AD/DA & Digital I/O PCIe Mini Card
- Standard PCI Express Mini Card
- User programmable FPGA (AMD Artix ™ 7)
- 14 TTL lines
- 5 V-tolerant
- ESD-protected I/O lines
- Each I/O line is individually configurable (e.g. direction)
- 3 output state (high, low, and tristate)
- 3 pull voltages (GND, 3.3 V, and 5 V)
- 4 channels 16 bit ADC
- Offering single-ended and differential mode
- 7 individually selectable voltage input ranges (up to ±10.24 V)
- Sampling rate up to 200 ksps
- 4 channels 16 bit DAC
- 4 individually selectable voltage output ranges (up to ±10.8 V)
- 10 μs conversion time
- Factory calibration data for ADC and DAC is available
- Provides a basic heatsink to facilitate thermal management
-
TPCE636
Reconfigurable FPGA with 16x Analog Input and 16x Analog Output
- Standard height, half-length PCI Express 2.1 compliant module
- Supports PCI Express x4 link
- User configurable FPGA (AMD Kintex™ 7)
- 1 Gbyte, 32 bit wide DDR3 SDRAM
- 64 FPGA I/O lines on back I/O connector
- 64 single ended LVCMOS25 or 32 differential LVDS25 interface.
- 16 channels 16 bit ADC
- Differential interface
- Input range ±20 V
- Sampling rate up to 5 Msps
- 16 channels 16 bit DAC
- Output range ±10 V
- Front panel I/O via Samtec ERF8-049 Rugged EdgeRate connector